HomepageLatest news and factsCheck out the latest eventsMod Of The MonthDo it yourselfFree downloadsWho are we?Everything you need for your car is in this shopDiscuss in this forum
disclaimer // e-mail: info@jamex.de // // Make this page your homepage

This is the section where you can show the modifications which you have done yourselves to your car, and help others to cut on their costs by doing the mods themselves. If you were able to make some nice detailed pics while placing the part, or the tips & tricks how you did the mod, please send these also and put some words to it. Send this and make this a nice helpful feature on this site. Maybe the mod you want to perform will be on here soon!
  Do it Yourself: Install a JAMEX Hood Lift.

This is how I did it!
   
 
11-6-2002
A short description to mount the JAMEX Hoodlifts on your car. First off….In case you haven't seen these yet, the Jamex Hood Lift kit replaces the factory hood prop rod with a pair of pneumatic lifters like the ones on the hatchback.

Jamex Hood Lift

First off….
In case you haven't seen these yet, the Jamex Hood Lift kit replaces the factory hood prop rod with a pair of pneumatic lifters like the ones on the hatchback. This is a really easy way to dress up the engine bay without spending a bunch of cash. I know a lot of people have made their own kits using replacement struts from an auto parts store. While they work just fine, I think the Jamex kit, available polished and in a few colors, looks way better. It retails for about $55 but I got mine at a car show for only $35, actually making it cheaper than trying to piece it together myself.

  

1. What You'll Need

 

    

  1. One Jamex hood lift kit.
  2. A sharp knife.
  3. 10mm wrench.
  4. 13mm wrench.

    That's it. See, I told you this was easy!
    Yes, I know the picture shows a socket, but after I took the photo I realized wrenches are needed to install the kit parts.

2. Installation

The kit supplied instructions are decent once you stand in front of the car with the sheet in hand. This is basically a paraphrased set of instructions.

      

Lift the hood and support it with the prop rod.(Duh!)

  1. Remove the upper bolt from the hood hinge and replace with a blunt ended bolt and washer from Next, remove the fender bolt at the front of the strut tower and replace with the pointed end bolt and washer from the kit.

          

Now remove the locking clips from the strut. There's one on each end. Just push the clip sideways, then slide it out of it's locating hole in the ball end.
 
Snap the strut into place, making sure the thicker end is to the top, and replace the locking clips.

Last, cut a notch in the foam bumper on the hood (just above the top of the strut) so it doesn't smash the strut when you close the hood.(see drawing C and photo below)

       


 
<< go back
 
 
 





Forgot your password?

Become a member and have all profits. See shop about for more information.


23-6-2005
Do it Yourself: Sport Spring Installation

12-6-2005
Do it Yourself: Frequently asked.. Part 3

12-5-2005
Do it Yourself: Frequently asked.. Part 2

12-4-2005
Do it Yourself: Frequently asked..Part 1

11-6-2003
TROUBLE WITH THE LAW?

11-6-2002
Do it Yourself: Install a JAMEX Hood Lift.



Your name:


Your e-mail address:

Your friend's name:


Your friend's e-mail address: